French Doors by Protech Direct
More Videos From Protech Direct
What sizes are your french doors available in?
Our french doors are made to measure and so can be made to fit any sized door opening
Can these french doors open inwardly to my home?
Our french doors can be made to open in or out, please specify which you would prefer when ordering
Will these french doors adhere to fire safety regulations?
The minimum size for a fire escape window is an unobstructed openable area that is at least 0.33m² (minimum dimensions: 750mm high and 450mm wide or 450mm high and 750mm wide). The bottom of the openable area should not be more than 1100m from the fall. See Building Regulations Approved Document B.
What materials are used in the production of these french doors?
Acrylic modified high quality imapact resistant, white unplasticised Polyvinyl Chloride extrusion to produce a rigid multi-chamber extrusion. The physical properties comply with BS EN 12608 2003.
What colours and/or finishes are these french doors available in?
Mahogany, White, Cherrywood and Light Oak, and its appearance is a smooth, non-porous gloss surface. The surface agent is stabilised against UV light to prevent excessive colour shift. Meets requirements of BS EN 12608 when used in the EU Moderate climate
What is the thermal conductivity of these doors?
Thermal Conductivity at 20° C: Typical test value 0.16 W/M deg C. PVCu has a low thermal conductivity and virtually constant over a wide constant range.
What is the specification of these doors?
Internal Bead Wide sash 5-point locking system including dead bolt as standard Lever/Lever handles in white as standard (Silver Gold and Black available at extra cost) Midrail 115mm Deep Restrictors available to specification Outer frame - Synseal Shield 70mm uPVC Free Upgrade from C Rated to A Rated Glass - Click Here for more details Reinforcement on: White PVCu complete door, outer frame side jambs only Woodgrain PVCu fully Weather bar fitted as standard Double Glazed with Toughened Safety Glass as standard White Lever / Lever handles to master leaf only (Silver, Gold and Black at extra cost) Finger shoot bolts (top and bttom) to slave leaf as standard Handles to slave available at extra cost Lever / Pad Handles Low threshold - aluminium / rubber 150mm cill as standard Our windows are mnufactured from profile supplied by Synseal Extrusion Ltd, which are Kitemarked to BS EN 12608 (Licence no. KM30983) and BS7950/BS EN12608 (Licence no. KM41324) Synseal Shield profiles have been assured by the BBA, Assessment report no. 1672 and no. 2519. All Shield window and door profiles are extruded from 100% virgin compound and are not diluted with second or more generation of reground extrusion profile.